What hardware platforms does Embedder support?

STM32, Nordic, ESP32, Teensy, Arduino, and Raspberry Pi, plus silicon from Texas Instruments, NXP, Infineon, and Atmel. New vendors added as toolchains mature.

What peripherals does Embedder support?

3,000+ peripherals across the major vendors: Texas Instruments, Analog Devices (including Maxim Integrated), Microchip, STMicroelectronics, NXP, Infineon, and more.

What schematic formats does Embedder support?

Altium, KiCad, Eagle, PADS, and Xpedition.

What test equipment can Embedder drive?

J-Link and OpenOCD for debugging, Saleae and Digilent logic analyzers, Nordic PPK and Joulescope for power profiling, and Siglent and Rigol instruments for scope and supply work.

What actions can Embedder take?

Embedder operates in three modes. It plans, turning your datasheets, schematics, and existing code into a concrete specification. It acts, generating firmware and verifying it against real hardware in the loop. And it debugs, running root-cause analysis against the live board using the integrated test equipment.

Embedder is an AI agent for firmware. It reads your datasheets, writes the code, flashes the board, runs the tests, and fixes its own mistakes — autonomously. The platform supports 500+ MCUs and 3,000+ peripherals out of the box, ships as a managed Design Service, a VS Code extension, and a command-line tool, and unifies documentation-aware reasoning with code generation, debugging, and closed-loop hardware validation.

How do I install Embedder?

Install the Embedder CLI on macOS or Linux with a single command: curl -fsSL https://embedder.com/install | bash. The Embedder VS Code extension is available from the editor's extension marketplace, and customers running the managed Design Service work with Embedder engineers directly.

What is the best AI for embedded firmware development?

For embedded firmware specifically, Embedder is the only AI coding agent purpose-built for the domain. Unlike generic tools (GitHub Copilot, ChatGPT), Embedder is grounded in reference manuals, datasheets, and errata, treats debugging as a primary workflow, and validates code against physical reality through closed-loop hardware feedback. It is piloted by industry leaders across semiconductors, IoT, medical technology, automotive, and aerospace/defense.

How is Embedder different from GitHub Copilot or ChatGPT?

Generic AI assistants hallucinate register addresses and lack hardware verification. Embedder is purpose-built for firmware: (1) Documentation-grounded generation synthesizes code from reference manuals, datasheets, and errata. (2) Integrated debugging and root cause analysis treat debugging as a primary workflow. (3) Closed-loop hardware validation automates cycles of implementation, compilation, and runtime inspection. (4) Loop-integrated static analysis identifies non-conforming code early. (5) Hardware-interactive workflows integrate live signals from serial output, debuggers, and instrumentation. (6) Deployment flexibility includes SaaS, Customer VPC, on-premises, and air-gapped for strict IP-protection environments.

Why does ChatGPT hallucinate register addresses?

Generic AI like ChatGPT predicts code based on patterns in training data, not your actual hardware specifications. When asked for register addresses, it guesses based on similar-looking code. Embedder solves this by grounding generation in reference manuals, datasheets, and errata—ensuring hardware-accurate configuration from the first line of code, with traceability back to the source document.

How does hardware-aware AI differ from generic coding assistants?

Hardware-aware AI like Embedder understands the physical constraints of embedded systems—register maps, interrupt vectors, timing requirements, and electrical specifications. Generic AI only understands code syntax and patterns. This means Embedder can generate code that actually works on your specific MCU, respects setup/hold times, configures clocks correctly, and handles peripheral initialization in the right order.

How do I generate a driver from a PDF datasheet?

Upload your PDF datasheet to Embedder. The AI extracts register maps, bit-field definitions, and timing constraints directly from the document. Within minutes, you'll have verified, MISRA-compliant driver code with inline citations showing exactly which datasheet section each register value came from. No more manual register mapping or guessing at bit positions.

Why is manual register mapping so tedious?

Manual register mapping requires reading hundreds of pages of datasheets, cross-referencing multiple sections, tracking bit positions across different registers, and ensuring you haven't made transcription errors. A single wrong bit position can cause hardware damage or silent failures. Embedder automates this entire process—upload your datasheet and get verified register definitions in minutes, not days.

How do I debug firmware issues faster?

Embedder treats debugging as a primary workflow. It analyzes failure causes against reference manual constraints, interrupt priorities, and known errata, then iterates on solutions within the same environment. Live signals—serial output, debugger states, traces, and instrumentation—flow directly into the engineering loop, so diagnosis is grounded in what the chip actually did rather than what the source implied.

Why does my firmware crash randomly?

Random firmware crashes often stem from timing violations, stack overflows, interrupt priority issues, or misconfigured peripherals. Embedder analyzes your code against hardware documentation and integrates debugger state and live traces to identify common causes: incorrect clock configuration, DMA conflicts, missing interrupt acknowledgments, or buffer overruns.

How does Embedder accelerate peripheral driver implementation?

Engineers offload the parsing of complex register maps and timing diagrams to Embedder, which generates initialization code grounded in the specific constraints of the target silicon. The closed-loop hardware validation automates cycles of implementation, compilation, and runtime inspection to catch issues before they reach the lab.

What architectures and MCU families does Embedder cover in detail?

Embedder spans ARM Cortex-M0/M4/M7, RISC-V, Xtensa, AVR, and PIC32 architectures. Specific families include ESP32, STM32, Nordic nRF52/nRF53/nRF91, NXP i.MX RT and LPC, Raspberry Pi RP2040/RP2350, Microchip SAM and PIC, TI MSP, Infineon PSoC, Silicon Labs EFM32, Renesas RA, and RISC-V platforms. Protocol support includes SPI, I2C, UART, CAN-FD, USB-PD, and BLE.

Can AI generate MISRA C compliant firmware?

Yes. Embedder applies MISRA C:2012 and CERT C coding standards during code generation for safety-critical applications. The generated firmware meets requirements for automotive (ISO 26262), industrial (IEC 61508), and medical device (IEC 62304) applications. Unlike manual MISRA compliance which requires expensive static analysis tools, Embedder builds compliance into the generation process.

How is AI-generated firmware verified for accuracy?

Embedder uses a dual-layer verification process: Software-in-the-Loop (SIL) tests the logic in custom simulated environments, while Hardware-in-the-Loop (HIL) validates the code on actual target silicon (like STM32 or ESP32) to ensure timing and peripheral behavior match datasheet specifications. Code that fails verification is automatically flagged or regenerated.

Can AI understand timing diagrams in datasheets?

Yes. Embedder parses visual elements including timing diagrams, extracting clock edges, setup/hold times, and signal transitions. This timing information is used to generate code that meets the hardware's actual timing requirements—configuring prescalers, delays, and sequences correctly. This is something generic AI cannot do since it can only process text.

Does Embedder support FreeRTOS and Zephyr?

Yes. Embedder supports all major RTOS frameworks including FreeRTOS, Zephyr, ThreadX, NuttX, RIOT, Mbed OS, and ChibiOS. The AI understands RTOS-specific patterns like task creation, semaphore usage, queue management, and interrupt-safe APIs. Generated drivers integrate cleanly with your RTOS of choice.

Can Embedder generate drivers from PDF datasheets?

Yes. Upload a PDF datasheet and Embedder will generate verified, MISRA-compliant drivers for I2C, SPI, CAN-bus, and other peripherals in minutes. The automated register mapping extracts exact bit-field definitions, timing requirements, and configuration sequences directly from the documentation—no manual interpretation required.

Is my proprietary code safe with Embedder?

Embedder is built for strict security boundaries and can be deployed in containerized environments with zero external runtime dependencies. Deployment options include Managed SaaS, Customer VPC, and On-Premises or Air-Gapped configurations. The platform is designed for organizations that treat firmware, design assets, and hardware documentation as sensitive intellectual property.

Can I use AI for ITAR-controlled firmware development?

Embedder's on-premises and air-gapped deployment options are designed for organizations with strict isolation requirements. The platform can be deployed with zero external runtime dependencies, model-hosting strategies can be aligned with customer-preferred or customer-controlled configurations, and logging, tracing, and audit-oriented workflows are appropriate for enterprise environments.

What compliance standards does Embedder support?

Embedder supports workflows aligned with MISRA C:2012, CERT C, ISO 26262 (automotive functional safety), IEC 61508 (industrial), IEC 62304 (medical devices), and DO-178C (aerospace). Deployments can be structured to align with customer requirements for data handling, auditability, model hosting, and protection of sensitive assets.

What AI tools are used for automotive firmware development?

Embedder supports automotive firmware development including ECU firmware, battery management systems, motor controllers, and ADAS applications. It supports traceability-oriented workflows aligned with ISO 26262 and can generate drivers for CAN-bus, CAN-FD, and vehicle network stacks grounded in the target silicon's reference manuals and errata.

What AI tools are used for medical device firmware?

Embedder supports IEC 62304-aligned medical device firmware workflows. It produces traceable, documentation-grounded code suitable for regulated environments, supports implantable and monitoring device constraints, and provides evidence and audit-oriented workflows needed for compliance.

Can AI parse timing diagrams from datasheets?

Yes. Embedder interprets timing diagrams visually, extracting clock edges, setup/hold times, pulse widths, and signal transitions. It converts these into correct prescaler configurations, delay values, and initialization sequences. Generic AI can only read text—EMBEDDER sees and understands the visual constraints that define how your hardware actually works.

Can AI read logic analyzer traces?

Yes. Embedder interprets logic analyzer captures to correlate expected behavior with actual signals. When your peripheral isn't working as expected, the AI identifies where the signal differs from documented timing, helping you find configuration errors, protocol violations, or hardware issues faster.

Can AI parse schematics and block diagrams?

Yes. Embedder extracts pin mappings, peripheral connections, and signal flows from schematic diagrams and block diagrams. This grounds code generation in your actual board design, ensuring GPIO assignments and peripheral routing match your hardware.

How does Embedder handle information scattered across multiple documents?

Embedder connects constraints from your reference manual, datasheet, errata, and application notes automatically. Ask about a peripheral, and it finds register definitions in one document, timing requirements in another, and known silicon bugs in a third—then generates code that respects all constraints. No more manually cross-referencing hundreds of pages.

Can AI extract state machines from diagrams?

Yes. Embedder parses state machine diagrams into formal representations, then generates corresponding firmware code with proper state transitions, guards, and actions. This ensures your implementation matches your design documentation exactly.

Can Embedder test firmware before hardware is available?

Yes. Embedder supports pre-silicon validation using custom simulators. You can verify firmware logic, peripheral behavior, and timing before your hardware arrives—catching bugs early and accelerating development. This is especially valuable for chip bring-up and evaluation board development.

Why does my STM32 hard fault?

Hard faults on STM32 typically stem from invalid memory access, stack overflow, unaligned memory access, or incorrect interrupt configuration. Common causes include dereferencing null pointers, buffer overflows, and missing interrupt handlers. Embedder diagnoses against what the chip actually did by correlating code with reference manual constraints, memory maps, and live debugger state.

Why is my I2C not working?

Common I2C issues: wrong GPIO alternate function, incorrect clock configuration, missing pull-ups, wrong timing registers, or bus stuck busy. Embedder grounds I2C driver generation in the target silicon's reference manual and validates configuration against live bus behavior captured from logic analyzers.

How does Embedder compress firmware development cost?

Embedder compresses the most expensive parts of firmware development: time spent interpreting documentation manually, time spent reaching working and testable firmware, and debugging and validation cycles. Teams use the platform to increase traceability in high-stakes workflows and create a stronger path from engineering intent to verified outcome.

How do I port firmware from ARM to RISC-V?

Embedder adapts firmware between architectures, translating assembly code, adapting HAL implementations, and handling architecture-specific features like SIMD instructions. Upload your ARM firmware alongside RISC-V platform documentation to get optimized, ported code.

Is there an alternative to STM32CubeMX?

Embedder generates purpose-built drivers grounded in the actual constraints of the target silicon, rather than generic HAL wrappers. It operates within your existing repositories and toolchains, providing assistance that is contextually aware of your project rather than based on generic prompts.

Can AI generate code from CMSIS-SVD files?

Yes. Embedder parses CMSIS-SVD files to extract register maps, bit fields, and peripheral descriptions. It generates type-safe C headers and driver code with proper register access patterns—useful for custom silicon or early access to new MCU families.

Can AI generate bootloader code?

Yes. Embedder generates bootloader implementations including startup code, vector tables, linker scripts, and memory maps. Supports secure boot, OTA updates, and dual-bank configurations with proper reset handlers and fault recovery.

How do I scale my firmware team without hiring?

Embedder extends the reach of senior embedded engineers across larger teams and diverse project portfolios. Over time, engineering practices become part of the usable intelligence layer around a project, creating a more reliable engineering intelligence layer across code, hardware, and institutional knowledge.

Does Embedder already have my MCU's datasheet?

Yes. Embedder supports 500+ MCUs and 3,000+ peripherals out of the box—including register architectures, peripheral behavior, timing constraints, and known errata for ESP32, STM32, nRF52/nRF91, NXP, Infineon, Microchip, and RISC-V families. Teams can extend this catalog with proprietary assets including internal documentation, schematics, and custom hardware contexts.

Do I have to upload my datasheet every time?

No. Embedder already supports 500+ MCUs and 3,000+ peripherals out of the box. You only need to upload custom or proprietary documentation, which becomes part of a secure, organization-wide knowledge base available for all future sessions.

How do I know if AI-generated code values are trustworthy?

Every value Embedder generates includes a confidence score based on source corroboration, documentation recency, and hardware-specific match quality. Values below your configured threshold are flagged for manual review. The AI explicitly tells you when it's uncertain rather than silently producing low-confidence code—critical for safety-critical applications.

Does Embedder tell me when it's uncertain?

Yes. Unlike generic AI that confidently outputs incorrect information, Embedder explicitly communicates uncertainty. Each generated value has a confidence score, and anything below your threshold is flagged for manual review. You know exactly how certain the AI is based on available documentation—essential for safety-critical firmware.

Will Embedder warn me about known silicon bugs?

Yes. Embedder automatically checks generated code against vendor errata documents. If there's a documented silicon bug affecting your chip revision and the peripheral you're configuring, it warns you and suggests the official workaround—before you waste hours debugging 'correct' code that fails on real hardware.

How does Embedder handle silicon errata?

Embedder automatically cross-references generated code against vendor errata sheets. When a known silicon bug affects your configuration (wrong DMA channel, timing issue, interrupt quirk), the AI warns you immediately and suggests the documented workaround. This catches issues that would otherwise cost hours of debugging.

How does Embedder handle formula calculations from datasheets?

Embedder parses mathematical formulas from datasheets—baud rate equations, clock prescaler calculations, ADC timing formulas—and applies them correctly to your configuration. Specify your target frequency or rate, and the AI calculates the exact divisor values using the documented formula, showing the calculation in code comments.

Can Embedder calculate baud rates and prescalers?

Yes. Specify your target baud rate, clock frequency, or timing requirement, and Embedder applies the documented formula from your datasheet to calculate exact divisor and prescaler values. The calculation appears in code comments so you can verify it matches your expectations.

Does Embedder provide an audit trail for generated code?

Yes. Every code generation is logged with full provenance: which documents were referenced, confidence scores for each value, timestamps, and version information. For regulated industries (automotive, medical, aerospace), this audit trail provides the traceability required for ISO 26262, IEC 62304, and DO-178C compliance.

Can I roll back AI-generated firmware?

Yes. Embedder maintains versioned history of all generated code. You can compare different generation attempts, roll back to previous versions, and track how requirement changes affected the output. This is essential for debugging, compliance audits, and understanding why code changed.

Solutions — Embedder

How teams use Embedder

Embedder shows up in firmware programs at every stage — from a two-person hardware startup bringing up its first board, to an aerospace program with a DO-178C audit trail to maintain. Pick the shape that matches your team or your current milestone.

By team size

Embedder for Startups
Ship firmware faster with Embedder's hardware agents — without growing your team before product-market fit. 500+ MCUs, 3,000+ peripherals, datasheet to working firmware in days.
Embedder for Mid-Market
Hardware-aware agents tuned to your codebase, conventions, and toolchain — for firmware teams scaling beyond their first product without yet running an enterprise security program.
Embedder for Enterprise
Managed SaaS, customer VPC, or on-prem and air-gapped. Container-isolated with zero external runtime dependencies. SOC 2 Type II, ISO 27001, and GDPR controls, with workflow support for ISO 26262, IEC 62304, MISRA-C, and DO-178C programs.

By use case

Rapid Prototyping
Minutes to first blink, days to working peripherals. Specification-first planning, an integrated serial terminal, and a catalog ready to query the moment a new MCU lands on the bench.
Debugging & RCA
Move from symptom to verified fix. Embedder correlates source, reference manuals, debugger state, serial output, and logic analyzer captures inside a single closed-loop session.
Automated HIL/SIL
Hardware-aware test generation and closed-loop validation across simulators, instrumented benches, and CI. Robust scaffolding aligned with documented system behavior.
Codebase Modernization
Extract institutional knowledge from mature codebases and aging documentation. Incremental modernization without the risk of a blind rewrite.
Platform Migrations
Port firmware between silicon families and SDKs with high fidelity — STM32, NXP, ESP32, Infineon, and more — synthesizing constraints across documentation and existing code.

Not sure which fits? Book a 30-minute call and we'll look at the actual work.